Complete Grow kit for 1 XL Plant oriented towards first time growers!
This grow kit is made up of a mix of essential nutrients and equipment chosen specifically by our experts to facilitate the learning experience in a 3' x 3' grow space.
Get proficient in growing indoors fast with this all-in-one growing system.
Every grow tent accomplishes the same task, providing a sealed and light proof environment. They sometimes vary in size or in the type of materials used to better accommodate the needs of every grower.
"The Living Room" 3’ x 3’ x 6.5’ Indoor Grow Tent
We recommend this grow tent model as a first due to its simplicity, ease of use and affordability.
- Dimensions : 3' x 3' x 6.5' (90 x 90 x 200 cm)
- 4 Equipment support arms included
- Floor splash tray included
- Support straps included
- Weight: 24 lbs (11kg)
LED Grow Light :
PhotonTek SQ300W Pro LED Grow Light
2.5’ x 2.5’
|Flower Footprint||3' x 3'|
|Light Output||816 µmol/s|
|HID/HPS Equivalent||600 watts|
22.08’’ x 22.08’’ x 2.82’’
|Recommended Height||12" - 40"|
|Manufacturer's Warranty||3 years|
24 hour Analog timer / 15 minutes & Adjustable light hangers
Grow lights have to be connected to timers in order to deliver a consistent light cycle. The hangers allow them to be mounted and adjusted to the correct height.
Climate Control :
An extractor fan is required to pull air through the tent ensuring a good airflow and cooling of the equipment. Good ventilation in a grow room or grow tent is crucial to the development of the plants and the cooling of the environment & equipment. It also allows to control the air quality as some plants can produce strong smells.
Stealth 4” Inline Fan + Stealth Filtration 45S 4” Carbon Filter Kit
- 189 CFM
- Dimensions: 5.77” L x 6.69” W x 12.17” H
- Weight: 8.82 lbs
- 100% Speed controllable
- Operating CFM: 150
- Dimensions : 101.6mm x 457.2mm / 4” x 18”
- 4” flange installed - Pre-filter included
- Weight: 13.3 lbs (6 kg)
Flexible Aluminium Duct 25ft x 4” w/ 2 clamps
Ducts are used to create an exhaust for the air pushed by the fan, clamps are used to connect the ducting to other components.
Connect one end of the duct to the output of the 4" fan, pass it through an exhaust port of the tent and redirect it where you want (preferably outside). Make sure to tighten the exhaust port around the duct to light proof and seal the growing environment.TNB Naturals pH Up & Down Powder (2x 454g)
TNB Up and Down are composed of all natural ingredients with the addition of no harmful chemicals.
This innovative way to raise and lower the pH levels of your hydroponic or liquid fertilizer is both simple and cost effective.
Simply add a small amount to your water, mix thoroughly and check your pH levels.
The pH (potential for hydrogen) of a nutrient solution is a very important aspect of plant growth and proper management is essential for healthy plants and lush gardens.
TNB Up and Down provide growers with a user friendly and safe way to maintain appropriate pH levels for optimal plant growth.
Nutri+ pH & TDS Quick Check Tester
These instruments are used to check if your nutrient solution has the correct pH (between 5.5 and 6.5 for most plants), and the Total Dissolved Solids (TDS) of a solution, i.e. the “concentration” (references are on the feeding schedule of your nutrient line), they can prevent significant stresses and unwanted alterations in the plant’s growth.
AutoPot 1 Pot XL (25L) System Kit /w 47 L Tank
Autopot System Kit is an automatic and extendable self-watering system.
The Autopot system is based on its "Aquavalve" valve system, the autopot can feed your plants for several weeks without the help of an electric pump or a timer.
Autopot System Kit...
- Operated by gravity pressure
- Easy to use in all environmental conditions
- Increase yields and reduce consumption of water
- Most environmentally friendly watering systems in the world
- No loss of water, run-off or leakage
- Easy to extend and modify
- No need of power, pump or timer to operate !
- Ideal for all type of gardeners, professional or not
1 Pot XL System includes:
- 1 x 12.4 gal reservoir & lid
- 1 x 1/4” top hat grommet
- 1 x 1/4” golf filter
- 1 x 1/4” inline tap
- 1 x 1 Pot XL tray & lid
- 1 x 6.6 gal pot
- 1 x AQUAvalve
- 1 x 5ft of 1/4” pipe
- 1 x Root Control Disc
Windmaker Clip Fan 6” (2 Speeds)
An extra fan moving air around in your grow tent can drastically improve the efficiency of your ventilation system.
One fan at canopy height on the opposite side of your extractor fan is the most efficient way to circulate air. It improves the airflow in your tent allowing cooler temps and most importantly strengthens the stems of the plants by moving them around simulating real winds.
This fan can be mounted wherever needed, has adjustable tilt, a two-speed operation and a 6ft long power cord. Dimensions : 15.5 x 21.5 x 23.4
Dial-A-Temp Speed Controller
By default a fan will run at its full power when plugged, this can be an issue for some people using powerful extractor fans as they can be noisy when running at full power and don’t require it most of the time.
This unit has a maximum rating of 300W / 2.5 Amps and features a On-Off switch, high to low variable
Thermo / Hydgrometer
Crucial to observe temperature and humidity in your growing environment, the addition of the recorded maximum and minimum temperatures feature allows to monitor peak temperatures at any time of the day, without having to check constantly.
Having an indoor / outdoor reading feature also allows to place the thermometer probe at canopy height and monitor the temperature at two different points in your environment (readings in °C and °F).
After your purchase, the items are subject to the respective manufacturer’s warranty policy.
These policies can be found on the original manufacturer’s website or by contacting them.
Indoor Growing Canada is not responsible for replacing, repairing or any costs associated with your item while under warranty.
Indoor Growing Canada will assist you in your warranty claim by helping you coordinate with the original manufacturer.